Source-Ip; User - H3C MSR 20-20 Command Reference Manual

Example

source-ip

Syntax
View
Parameter
Description
Example

user

Syntax
View
Parameter
By default, IP address is used.
# Set the domain name of the SIP device to hello.com.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] sip-domain hello.com
source-ip ip-address
undo source-ip
SIP client view
ip-address: IPv4 address.
Use the command to configure the source IP address bound to the
source-ip
packets sent by the UA.
Use the
undo source-ip
By default, no source IP address is configured to be bound to the packets sent by
the UA.
Note that the source IP address must be already assigned to a gateway interface.
You can use this command only when the SIP registration function is disabled.
# Specify 1.1.1.1 as the source IP address bound to the packets sent by the UA.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] source-ip 1.1.1.1
user username password { cipher | simple } password [ cnonce cnonce | realm
realm ] *
undo user
SIP client view/POTS entity view
username: Username used for registration authentication, a string of 1 to 31
case-sensitive characters. The characters """ and "" are invalid.
command to remove the configuration.
2707