Acsei-Client Debug Show; Chkconfig Acseid Off - H3C MSR 20-20 Command Reference Manual

2524 C 170: ACSEI C
HAPTER
Description
Examples

acsei-client debug show

Syntax
View
Parameters
Description
Examples

chkconfig acseid off

Syntax
View
Parameters
Description
C C
LIENT ONFIGURATION OMMANDS
Use the acsei-client debug enable
client.
By default, debugging for ACSEI client is disabled.
# Enable debugging for ACSEI client.
<Sysname> oap connect slot 6
Connected to OAP!
[root@localhost ~]# acsei-client debug enable
acsei-client debug show
Any directory of the Linux system
None
Use the
acsei-client debug show
information about ACSEI client.
By default, no ACSEI client debugging will be displayed.
ACSEI client debugging is displayed through a pipe; therefore, part of the
debugging information may fail to be displayed when the pipe is full.
# Display the ACSEI client debugging information.
<Sysname> oap connect slot 6
Connected to OAP!
[root@localhost ~]# acsei-client debug enable
[root@localhost ~]# acsei-client debug show
chkconfig acseid off
Any directory of the Linux system
None
Use the
chkconfig acseid off
automatically, that is, configure not to start up ACSEI client simultaneously with
the system.
By default, ACSEI client installed on the OAP module is started up automatically
when the system is started up.
command to enable debugging for ACSEI
command to display the debugging
command to configure not to start up ACSEI client