Timer Dial-Interval - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Example

timer dial-interval

Syntax
View
Parameter
Description
Example
Voice view
line-number: Voice subscriber line number.
Use the
subscriber-line
E1/T1 voice subscriber line view.
Use the subscriber-line
view. For example, if line-number is an FXS voice subscriber line, the system will
enter the FXS voice subscriber line view; if line-number is an analog E&M voice
subscriber line, the system will enter analog E&M voice subscriber line view.
# Enter the view of the voice subscriber line 1/0 in voice view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0]
timer dial-interval seconds
undo timer dial-interval
FXS/FXO/E&M voice subscriber line view
seconds: Maximum interval in seconds for dialing the next digit, in the range of 1
to 300.
Use the
timer dial-interval
dialing the next digit.
Use the undo timer dial-interval
By default, the maximum interval for dialing the next digit is 10 seconds.
This timer will restart each time the subscriber dials a digit and will work in this
way until all the digits of the number are dialed. If the timer expires before the
dialing is completed, the subscriber will be prompted to hook up and the call is
terminated.
# Set the maximum duration waiting for the next digit on voice line 1/0 to 5
seconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0] timer dial-interval 5
command to enter analog FXS, FXO, and E&M, or digital
line-number command to enter the voice subscriber line
command to configure the maximum interval for
command to restore the default setting.
2611