Accounting-Did - H3C MSR 20-20 Command Reference Manual

2722 C 180: V
HAPTER OICE
Related command:
Example

accounting-did

Syntax
View
Parameter
Description
Related command:
Example
RADIUS C C
ONFIGURATION OMMANDS
With the RADIUS accounting function enabled, the RADIUS server will perform
accounting for all users who use this access number. With the function disabled,
the RADIUS server will not perform accounting for users who dial the access
number.
gw-access-number, acct-method, and accounting-did.
# Enable the RADIUS accounting function for users who dial the access number
17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] accounting
# Disable the RADIUS accounting function for users who dial the access number
17909.
[Sysname-voice-dial-anum17909] undo accounting
accounting-did
undo accounting-did
Voice AAA client view
None
Use the
accounting-did
for all one-stage dialing users.
Use the undo accounting-did
function.
By default, the RADIUS accounting function is disabled for all one-stage dialing
users.
On one voice gateway, the RADIUS accounting for one-stage dialing users is
separated from that for two-stage dialing users. This command is applicable to
only one-stage dialing users. With this function enabled, the RADIUS server will
perform RADIUS accounting for all calls originated by one-stage dialing users.
With this function disabled, the RADIUS server will not perform accounting for any
calls originated by one-stage dialing users.
acct-method and accounting.
# Enable the accounting function for all one-stage dialing users.
command to enable the RADIUS accounting function
command to disable the RADIUS accounting