Ipx Sap Gns-Disable-Reply; Ipx Sap Gns-Load-Balance - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Example

ipx sap gns-disable-reply

Syntax
View
Parameter
Description
Example

ipx sap gns-load-balance

Syntax
View
Interface view
None
Use the
ipx sap disable
Use the
undo ipx sap disable
interface.
By default, the SAP is enabled on the interface after IPX is enabled.
# Disable SAP on the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx sap disable
ipx sap gns-disable-reply
undo ipx sap gns-disable-reply
Interface view
None
Use the
ipx sap gns-disable-reply
responding to IPX GNS requests.
Use the undo ipx sap gns-disable-reply
respond to IPX GNS requests.
By default, an interface is capable of responding to GNS requests.
# Disable Ethernet 1/0 from responding to IPX GNS requests.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx sap gns-disable-reply
ipx sap gns-load-balance
undo ipx sap gns-load-balance
System view
command to disable IPX SAP on the current interface.
command to enable IPX SAP on the current
command to disable the interface from
command to enable the interface to
2545