Select-Stop - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

select-stop

Syntax
View
Parameter
Description
Related command:
Example
Table 693 Meanings of values
Value
3
Use the
select-rule type-first
selection priority.
Use the
undo select-rule type-first
type selection priority.
By default, voice entities are not selected according to their types.
The command is used to configure the sequence of voice entity type selection
priority. If different types of voice entities are qualified for a call connection, the
system selects a suitable voice entity according to the voice entity type selection
priority rule configured by the select-rule type-first command. The order of
inputting the parameters determines voice entity type priorities. The system selects
the first type first, then the second type, and finally the third type.
select-rule rule-order and select-rule search-stop.
# Configure the system to select VoIP voice entities in the order of
VoIP->POTS->VoFR.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] select-rule type-first 2 1 3
select-stop
undo select-stop
Voice entity view
None
Use the command to disable the voice entity search function.
select-stop
Use the
undo select-stop
By default, the voice entity search function is enabled.
select-rule rule-order and select-rule type-first.
# Disable the voice entity search function for voice entity 10.
Meaning
VoFR voice entity
command to configure a rule for voice entity type
command to remove a rule for voice entity
command to enable the voice entity search function.
2641