Reset Voice Sip; Sip-Comp - H3C MSR 20-20 Command Reference Manual

2704 C 178: SIP C
HAPTER
Example

reset voice sip

Syntax
View
Parameter
Description
Example
sip
Syntax
View
Parameter
Description
Example

sip-comp

Syntax
C
ONFIGURATION OMMANDS
By default, no registrar information is configured on the SIP UA.
You can use this command only when the SIP registration function is disabled.
# Configure the IP address 169.54.5.10, the port number 1120, and the aging
time 120 seconds for the master registrar.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] registrar ipv4 169.54.5.10 port 1120 expires 120
reset voice sip
User view
None
Use the
reset voice sip
# Clear all the statistics about the SIP client.
<Router> reset voice sip
sip
Voice view
None
Use the sip command to enter SIP client view.
Before you can configure a UA, you should first enter its view with this command.
# Enter SIP client view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip]
sip-comp { callee | from }
command to clear all the statistics about the SIP client.