H3C MSR 20-20 Command Reference Manual page 2399

View Any view
Parameter -a source-ipv6: Specifies the source IPv6 address of an ICMP echo request. It must
be a legal IPv6 address configured on the device.
-c count: Specifies the number of times that an ICMPv6 echo request is sent, in the
range 1 to 4294967295. The default value is 5.
-m interval: Specifies the interval (in milliseconds) to send an ICMPv6 echo reply, in
the range 1 to 65535. The default value is 200 ms.
If a response from the destination is received within the timeout time, the
■
interval to send the next echo request equals the actual response period plus
the value of interval.
If no response from the destination is received within the timeout time, the
■
interval to send the next echo request equals the timeout value plus the value
of interval.
-s packet-size: Specifies length (in bytes) of an ICMPv6 echo request, in the range
20 to 8100. It defaults to 56.
-t timeout: Specifies the timeout value (in milliseconds) of an ICMPv6 echo
request, in the range 0 to 65535. It defaults to 2000.
remote-system: IPv6 address or host name (a string of 1 to 46 characters) of the
destination device.
-i interface-type interface-number: Specifies an outgoing interface by its type and
number. This parameter can be used only in case that the destination address is
the link local address and the specified outgoing interface must have a link local
address (For the configuration of link local address, see "IPv6 Basics Configuration
Commands" on page 829).
Description Use the
display the corresponding statistics.
You must use the command in the form of ping ipv6 ipv6 instead of ping ipv6 if
the destination name is an ipv6 name.
Example # Verify whether the IPv6 address 2001::1 is reachable.
<Sysname> ping ipv6 2001::1
PING 2001::1 : 56
Reply from 2001::1
Reply from 2001::1
Reply from 2001::1
Reply from 2001::1
Reply from 2001::1
--- 2001::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 0/4/20 ms
ping ipv6 command to verify whether an IPv6 address is reachable, and
data bytes, press CTRL_C to break
bytes=56 Sequence=1 hop limit=64
bytes=56 Sequence=2 hop limit=64
bytes=56 Sequence=3 hop limit=64
bytes=56 Sequence=4 hop limit=64
bytes=56 Sequence=5 hop limit=64
2399
time = 20 ms
time = 0 ms
time = 0 ms
time = 0 ms
time = 0 ms