Plc-Mode - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

plc-mode

Syntax
View
Parameter
g726r16: Packetization period in milliseconds for g726r16 codec, an integral
multiple of 10 in the range of 10 to 110, with a default of 30.
g726r24: Packetization period in milliseconds for g726r24 codec, an integral
multiple of 10 in the range of 10 to 70, with a default of 30.
g726r32: Packetization period in milliseconds for g726r32 codec, an integral
multiple of 10 in the range of 10 to 50, with a default of 30.
g726r40: Packetization period in milliseconds for g726r40 codec, an integral
multiple of 10 in the range of 10 to 40, with a default of 30.
g729: Packetization period in milliseconds for g729r8 or g729a codec, an integral
multiple of 10 in the range of 20 to 180, with a default of 30.
time-length: DSP packetization period for a codec.
Use the
payload-size
different codecs.
Use the
undo payload-size
By default, the voice packetization period for g971 is 20 milliseconds, and that for
g723, g726, and g726 is 30 milliseconds.
In voice dial program view, you can configure global attributes for voice entities,
namely, the default voice packetization period of the DSP for each codec.
default entity payload-size, entity compression.
# Set the voice packetization period of the DSP for g711 codec to 30 milliseconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] payload-size g711 30
# Restore the default voice packetization period of the voice entity for g9711
codec.
[Sysname-voice-dial-entity10] undo payload-size g711
plc-mode { general | specific }
undo plc-mode
Analog FXS/FXO voice subscriber line view
general: Uses the universal frame erasure algorithm.
command to configure the voice packetization period for
command to restore the default.
2603