Activation-Key - H3C MSR 20-20 Command Reference Manual

2450 C 164: U
HAPTER SER

activation-key

Syntax
View
Parameter
Description
Example
I C C
NTERFACE ONFIGURATION
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] undo acl 2001 outbound
activation-key character
undo activation-key
User interface view
character: Shortcut key for starting terminal sessions, a single character (or its
corresponding ASCII code value in the range 0 to 127) or a string of 1 to 3
characters.
Use the
activation-key
session.
Use the undo activation-key
You can use a single character (or its corresponding ASCII code value in the range
0 to 127) or a string of 1 to 3 characters to define a shortcut key. But in fact, only
the first character functions as the shortcut key. For example, if you input an ASCII
code value 97, the system will use its corresponding character a as the shortcut
key; if you input the string b@c, the system will use the first letter b as the shortcut
key.
By default, pressing the Enter key starts the terminal sessions. However, if you
define a new shortcut key using the activation-key command, the Enter key no
longer functions. You can use the display current-configuration command to
display the shortcut key you have defined.
n
The display current-configuration command is not supported on the VTY user
interface.
# Use letter s as the shortcut key for starting terminal sessions on the Console
port.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0] activation-key s
To verify the configuration, do the following:
# Exit the terminal session on the Console port.
[Sysname-ui-console0] return
<Sysname> quit
**************************************************************************
* All rights reserved (2004-2006)
* Without the owner's prior written consent,
* No decompiling or reverse-switch fabricering shall be allowed.
OMMANDS
command to define a shortcut key for starting a terminal
command to restore the default.
*
*
*