Info-Center Logfile Enable; Info-Center Logfile Frequency - H3C MSR 20-20 Command Reference Manual

Example

info-center logfile enable

Syntax
View
Parameter
Description
Example

info-center logfile frequency

Syntax
View
Parameter
By default, information output to the log buffer is enabled with channel 4
(logbuffer) as the default channel and a maximum buffer size of 512.
Note that the info-center logbuffer command takes effect only after the
information center is enabled with the info-center enable command.
# Enable the system to output information to the log buffer with a default buffer
size of 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
info-center logfile enable
undo info-center logfile enable
System view
None
Use the info-center logfile enable
information to the log file.
Use the
undo info-center logfile enable
system information to the log file.
By default, the output of system information to the log file is enabled.
n
The support for the command varies with devices.
# Enable the log file feature.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency freq-sec
undo info-center logfile frequency
System view
freq-sec: Frequency with which the system saves the log file, in the range 1 to
86,400 seconds. The value is with devices.
command to enable the output of system
command to disable the output of
2435