display history-command
Syntax
View
Parameter
Description
Example
display hotkey
Syntax
View
Parameter
Description
Example
display history-command
Any view
None
Use the
display history-command
the history buffer.
The system will save validated history commands performed last in current user
view to the history buffer, which can save up to ten commands by default. You can
use the history-command max-size command to set the size of the history
buffer. Refer to "history-command max-size" on page 2460 for related
configuration.
# Display validated history commands in current user view (the display information
varies with configuration).
<Sysname> display history-command
display history-command
system-view
vlan 2
quit
display hotkey
Any view
None
Use the
display hotkey
# Display hotkey information.
<Sysname> display hotkey
----------------- HOTKEY -----------------
=Defined hotkeys=
Hotkeys Command
CTRL_G
display current-configuration
CTRL_L
display ip routing-table
CTRL_O
undo debug all
=Undefined hotkeys=
Hotkeys Command
CTRL_T
NULL
CTRL_U
NULL
command to display commands saved in
command to display hotkey information.
2415