Terminator - H3C MSR 20-20 Command Reference Manual

terminator

Syntax
View
Parameter
Description
Related command:
Example
# Apply number substitution rule lists 5, 6, and 8 to called numbers of outgoing
calls.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] substitute outgoing-call called 5
[Sysname-voice-dial] substitute outgoing-call called 6
[Sysname-voice-dial] substitute outgoing-call called 8
terminator character
undo terminator
Voice dial program view
character: Dial terminator, which can be any of 0 through 9, pound sign (#), or
asterisk (*).
Use the terminator command to configure a special character as the dial
terminator for length-variable telephone numbers.
Use the
undo terminator
configuration.
By default, no dial terminator is configured.
match-template on page 2599 and timer.
# Specify the pound sign (#) as the dial terminator.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] terminator #
command to remove the dial terminator
2645