Shell - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

shell

Syntax
View
Parameter
Description
1234567 for example. A cipher text password, or the encrypted version of the
plain text password, comprises 24 characters, such as
_(TT8F]Y5SQ=^Q'MAF4<1!!.
Use the
set authentication password
password.
Use the undo set authentication password
authentication password.
No local authentication password is set by default.
When setting a password, you should specify simple to save it in plain text in
■
the configuration file, or specify cipher to save it in cipher text.
Whether the password format is plain text or cipher text, you must type in plain
■
text password at authentication.
Plain text password easily gets cracked. Therefore, you are recommended to
■
use cipher text password.
authentication-mode.
# Set the local authentication password for the user interface Console 0 to hello.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0] authentication-mode password
[Sysname-ui-console0] set authentication password cipher hello
After setting the password, you will be required to input the password next time
you enter the system.
shell
undo shell
User interface view
None
Use the command to enable terminal services on the user interface.
shell
Use the command to disable this function.
undo shell
By default, terminal services are enabled on all user interfaces.
There are a few restrictions on using the undo shell command:
This command is not supported on the Console port.
■
command to set a local authentication
command to remove the local
2471