Ras-On; Voip H323-Descriptor - H3C MSR 20-20 Command Reference Manual

Related command:
Example

ras-on

Syntax
View
Parameter
Description
Related command:
Example

voip h323-descriptor

Syntax
area-id, gk-2nd-id, gk-id, gw-address, and ras-on.
# Assign the alias citya-gw to the gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gw-id citya-gw
ras-on
undo ras-on
Gatekeeper client view
None
Use the command to activate gatekeeper client to register with the
ras-on
gatekeeper.
Use the
undo ras-on
By default, the gatekeeper client is disabled.
Only when the gatekeeper client function is active can the normal communication
be maintained between the voice gateway and the gatekeeper. When the function
is inactive, the voice gateway cannot set up connection with the gatekeeper.
The GK client can be enabled only after the GK- and gateway-related
configurations are completed.
gw-id, gw-address, and gk-id.
# Activate gatekeeper client.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gw-id gateway1
[Sysname-voice-gk] gw-address 192.168.1.1
[Sysname-voice-gk] gk-id gatekeeper gk-addr 192.168.1.2
[Sysname-voice-gk] ras-on
voip h323-descriptor descriptor
undo voip h323-descriptor
command to deactivate gatekeeper client.
2697