display ipx routing-table verbose
Syntax
View
Parameter
Description
Example
Table 659 Description on the fields of the display ipx routing-table command
Field
Dest_Ntwk_ID
Proto
Pre
Ticks
Hops
Nexthop
Interface
display ipx routing-table [ network ] verbose
Any view
Network: Displays detailed routing information for the network, including both
active and inactive routes.
Use the
display ipx routing-table verbose
routing information, including active and inactive routes.
If no network is specified, all detailed IPX routing information is displayed.
# Display all detailed IPX routing information, including active and inactive routes.
<Sysname> display ipx routing-table verbose
Routing tables:
Destinations: 2
Destination Network ID: 0x1
Protocol: Direct
Ticks: 1
Nexthop: 0.0000-0000-0000
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Protocol: Static
Ticks: 1
Nexthop: 2.000e-0001-0000
Interface: 2.0020-9c68-448f(Vlan-interface2)
State: <Inactive>
Destination Network ID: 0x2
Protocol: Static
Ticks: 1
Nexthop: 1.000e-0001-0000
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Table 660 Description on the fields of the display ipx routing-table verbose command
Field
Destinations
Description
Destination network ID of the route
Protocol type of the route
Preference of the route
Delay time of the route in ticks (a tick is 1/18 second)
Hop value of the route
The next hop of the route
Outgoing interface of the route
command to display detailed IPX
Routes: 3
Description
Total number of destinations
2533
Preference: 0
Hops: 0
Time: 0
Preference: -60
Hops: 1
Time: 0
Preference: 60
Hops: 1
Time: 0