Display Ipx Statistics - H3C MSR 20-20 Command Reference Manual

2536 C 172: IPX C
HAPTER
Description
Example

display ipx statistics

Syntax
View
C
ONFIGURATION OMMANDS
order { network | type }: Displays sorted service information. The network
keyword indicates that information is sorted by network. The type keyword
indicates that information is sorted by type.
type service-type: Displays information about a specified service type ID, which is
in the range of 0x1 to 0xFFFF.
verbose: Displays detailed about service information.
Use the display ipx service-table
If no parameters are specified, only active service information is displayed.
# Display active IPX service information.
<Sysname> display ipx service-table
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which the se
rvice is received
Number of Static Entries:
Number of Dynamic Entries: 0
Name
S Prn1
S Prn2
# Display detailed IPX service information.
<Sysname> display ipx service-table verbose
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which the se
rvice is received
Number of Static Entries:
Number of Dynamic Entries: 0
Name Type
S Prn1 0005
S Prn2 0005
Table 662 Description on the fields of the display ipx service-table command
Field
Name
Type
NetId
NodeId
Sock
Pref
Hops
Recv-If
display ipx statistics
Any view
command to display IPX service information.
2
2
NetId NodeId Sock
000d 000a-000a-000a 0452
0008 000a-000a-000a 0452
Type NetId
0005 000d
0005 0008
Pref Hops Recv-If
500 02 Vlan-interface1
500 03 Vlan-interface1
Description
Server name
Service type
Network ID
Node ID
Socket
Preference
Hops to the server
Name of the receiving interface