Cptone Tone-Type - H3C MSR 20-20 Command Reference Manual

2566 C 173: V IP C
HAPTER O
Description
Example

cptone tone-type

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
Use the cptone country-type
the call progress tones of a specified country or region or play the customized call
progress tones.
Use the
undo cptone country-type
By default, the call progress tones of China are specified.
c
CAUTION: The configuration of the cptone country-type command will take
effect on all voice interfaces of all cards on the device.
# Configure the device to play the call progress tones of US.
<sysname> system-view
[sysname] voice-setup
[sysname-voice] cptone country-type us
cptone tone-type { all | busy-tone | congestion-tone | dial-tone | ringback-tone |
special-dial-tone | waiting-tone } amplitude value
undo cptone tone-type { all | busy-tone | congestion-tone | dial-tone | ringback-tone
| special-dial-tone | waiting-tone } amplitude
Voice view
all: All types of call progress tones.
busy-tone: Busy tone.
congestion-tone: Congestion tone.
dial-tone: Dial tone.
ringback-tone: Ringback tone.
special-dial-tone: Special dial tone.
waiting-tone: Call waiting tone.
amplitude value: Specifies the amplitude of a progress tone, which ranges from
200 to 1,500.
Use the cptone tone-type
call progress tones.
Use the
undo cptone tone-type
By default, the amplitude of busy tone and congestion tone is 1000, that of dial
tone and special dial tone is 400, and that of ringback tone and call waiting tone is
600.
command to configure the current device to play
command to restore the default.
command to configure the amplitude of the specified
command to restore the default.