Select-Rule Type-First - H3C MSR 20-20 Command Reference Manual

2640 C 174: D
HAPTER IAL
View
Parameter
Description
Related command:
Example

select-rule type-first

Syntax
View
Parameter
P C C
LAN ONFIGURATION OMMANDS
Voice dial program view
max-number: Maximum number of voice entities found, in the range 1 to 128.
Use the select-rule search-stop
of voice entities found.
Use the
undo select-rule search-stop
number of voice entities found to 128.
By default, the maximum number of voice entities found is 128.
The select-rule search-stop command is used to define the maximum number of
qualified voice entities to be found before the search stops. Even if the number of
voice entities meeting call requirements is greater than max-number, the system
will make call attempts to only the maximum number (max-number) of voice
entities that are matched in accordance with rules.
select-rule rule-order and select-rule type-first.
# Configure the maximum number of voice entities found to 5.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] select-rule search-stop 5
select-rule type-first 1st-type 2nd-type 3rd-type
undo select-rule type-first
Voice dial program view
1st-type: Serial number of the type of the first priority, in the range of 1 to 3.
Table 693 describes these values:
2nd-type: Serial number of the type of the second priority, in the range of 1 to 3.
The value must be different from that of 1st-type.
3rd-type: Serial number of the type of the third priority, in the range of 1 to 3. The
value must be different from that of 1st-type and 2nd-type.
Table 693 describes the meanings of these values.
Table 693 Meanings of values
Value
1
2
command to configure the maximum number
command to restore the maximum
Meaning
POTS voice entity
VoIP voice entity