Poe Pd-Description; Poe Pd-Policy Priority - H3C MSR 20-20 Command Reference Manual

Example

poe pd-description

Syntax
View
Parameter
Description
Example

poe pd-policy priority

Syntax
View
In the signal mode, lines in Category 3 and 5 twisted pair cables used for
■
transmitting data are also used for supplying DC power.
In the spare mode, lines in Category 3 and 5 twisted pair cables not in use are
■
used for supplying DC power.
# Set the PoE mode to signal (power over signal cables).
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0]poe mode signal
# Set the PoE mode to signal (power over signal cables) through a PoE
configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe mode signal
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0]apply poe-profile name abc
poe pd-description string
undo poe pd-description
PoE interface view
string: Description of the PD connected to a PoE interface, up to 80 characters.
Use the poe pd-description
connected to a PoE interface.
Use the
undo poe pd-description
By default, no description is available for the PD connected to a PoE interface.
# Describe the PD connected to Ethernet1/0 as IP Phone For Room 101.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0]poe pd-description IP Phone For Room 101
poe pd-policy priority
undo poe pd-policy priority
System view
command to configure a description for the PD
command to restore the default.
2501