Ftp Timeout; Ftp Update - H3C MSR 20-20 Command Reference Manual

Example

ftp timeout

Syntax
View
Parameter
Description
Example

ftp update

Syntax
View
Parameter
Description
Use the
undo ftp server
By default, the FTP server is disabled to prevent attacks.
# Disable the FTP server.
<Sysname> system-view
[Sysname] undo ftp server
% Close FTP server
ftp timeout minute
undo ftp timeout
System view
minute: Idle-timeout timer in minutes, in the range 1 to 35791. The default is 30
minutes.
Use the ftp timeout command to set the idle-timeout timer.
Use the
undo ftp timeout
After you log onto the FTP server, you set up an FTP connection. When the
connection is disrupted, the FTP server, if not notified, cannot realize that and
maintains the connection all the same. To address this problem, you can set an
idle-timeout timer to have the FTP server disconnected if no information is received
or/and transmitted before the timer expires.
# Set the idle-timeout timer to 36 minutes.
<Sysname> system-view
[Sysname] ftp timeout 36
ftp update { fast | normal }
undo ftp update
System view
fast: Fast update.
normal: Normal update.
Use the command to set the file update mode that the FTP server
ftp update
uses while receiving data.
command to disable the FTP server.
command to restore the default.
2371