Example
gk-security register-pwd
Syntax
View
Parameter
Description
Example
gw-address
Syntax
Use the
undo gk-security call enable
the voice gateway.
By default, security calling is enabled.
c
CAUTION: Disable security calling for the voice gateway if the called gatekeeper
cannot handle call tokens.
# Disable security calling for the voice gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] undo gk-security call enable
gk-security register-pwd { cipher | simple } password
undo gk-security register-pwd
Gatekeeper client view
cipher: Displays passwords in ciphertext.
simple: Displays passwords in plain text.
password: A string of 1 to 16 characters excluding spaces.
Use the
gk security register-pwd
registration with the gatekeeper.
Use the
undo gk-security register-pwd
password.
By default, no registration password is configured on the voice gateway.
Note that messages exchanged during the entire registration process will carry the
registration password, if it is configured on the voice gateway.
# Configure a registration password aaa and set its display mode to ciphertext.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gk-security register-pwd cipher aaa
gw-address ip-address
command to disable security calling on
command to configure a password for
command to remove the registration
2695