Echo-Canceller Parameter - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

2592
C
173: V
IP C
HAPTER
O
Description
Related command:
Example

echo-canceller parameter

Syntax
View
Parameter
Description
C
ONFIGURATION
OMMANDS
tail-length milliseconds: Echo duration in milliseconds, that is, the time that
elapses from when a subscriber speaks to when he hears the echo. It ranges from
0 to 64, with a default of 32.
Use the
echo-canceller
duration.
Use the
undo echo-canceller
By default, the EC function is disabled.
n
This command is applicable only after the echo-canceller enable command is
executed.
subscriber-line and echo-canceller parameter.
Configure the echo duration on voice subscriber line 1/0 to 24 milliseconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-dial-line1/0] echo-canceller enable
[Sysname-voice-dial-line1/0] echo-canceller tail-length 24
echo-canceller parameter { convergence-rate value | max-amplitude value |
mix-proportion-ratio value | talk-threshold value }
undo echo-canceller parameter { convergence-rate | max-amplitude |
mix-proportion-ratio | talk-threshold }
Voice view
convergence-rate value: Sets the convergence rate of comfort noise amplitude. It
ranges from 0 to 511. The greater the value, the quicker the convergence.
max-amplitude value: Sets the maximum amplitude of comfort noise. It ranges
from 0 to 2,048. The higher the value, the greater the maximum noise amplitude.
The value "0" indicates that the system performs only nonlinear processing and
does not add comfort noise.
mix-proportion-ratio value: Sets the comfort noise mixture proportion control
factor. It ranges from 0 to 3,000 and defaults to 100. The greater the value, the
higher the proportion of noise in the hybrid of noise and voice.
talk-threshold value: Sets the threshold of two-way talk. It ranges from 0 to 2.
Use the
echo-canceller parameter
parameters.
command to enable echo cancellation and set the echo
command to disable the EC function.
command to configure echo cancellation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents