Area-Id; Display Voice Gateway - H3C MSR 20-20 Command Reference Manual

177

area-id

Syntax
View
Parameter
Description
Related command:
Example

display voice gateway

Syntax
View
H.323 C
ONFIGURATION
area-id string
undo area-id [string ]
Gatekeeper client view
string: Area ID, a digit string that is 1 to 31 characters in length. The pound signs
(#) can be used as delimiters in the string.
Use the command to assign an area ID to the H.323 gateway.
area-id
Use the
undo-area-id
By default, no area ID is assigned to the H.323 gateway.
Each area ID identifies a particular type of gateway, for example, 1# for the voice
gateway and 2# for the video gateway, depending on the agreement that the
gateway and the gatekeeper reaches beforehand. When a VoIP entity
communicates with the gatekeeper, the gatekeeper uses the received area ID to
identify the type of the gateway.
You may assign up to 30 area IDs to the H.323 gateway.
match-template on page 2599, entity on page 2594.
# Assign area ID 6# to the gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] area-id 6#
display voice gateway
Any view
command to remove the specified or all area IDs.
C
OMMANDS