Tftp Client Configuration Commands; Display Tftp Client Configuration; Tftp-Server Acl - H3C MSR 20-20 Command Reference Manual

display tftp client configuration

Syntax
View
Parameter
Description
Related command:
Example

tftp-server acl

Syntax
View
Parameter
TFTP C
C
OMMANDS
display tftp client configuration
Any view
None
Use the
display tftp client configuration
configuration information of the TFTP client.
tftp client source.
# Display the current configuration information of the TFTP client.
<Sysname> display tftp client configuration
The source IP address is 192.168.0.123
n
Currently this command displays the source address configuration information. If
the currently valid source address is the source IP address, the configured source IP
address is displayed; if the currently valid address is the source interface, the
configured source interface is displayed.
tftp-server [ ipv6 ] acl acl-number
undo tftp-server [ ipv6 ] acl
System view
ipv6: References an IPv6 ACL. If it is not specified, an IPv4 ACL is referenced.
acl-number: Number of basic ACL, in the range 2000 to 2999.
159
C
LIENT ONFIGURATION
command to display the
2391