Ipx Split-Horizon; Ipx Tick - H3C MSR 20-20 Command Reference Manual

Description
Example

ipx split-horizon

Syntax
View
Parameter
Description
Example

ipx tick

Syntax
hop hop-count: Number of hops to reach the server, ranging from 1 to 15. Note
that hop count more than or equal to 16 implies the service is unreachable.
preference preference: Preference of service information, ranging from 1 to 255.
The smaller the value, the higher the preference. By default, the preference of the
static service information items is 60 and is configurable, and the preference of the
dynamic items is 500 and cannot be configured.
all: Deletes all static service information items.
Use the command to add an IPX static service information item.
ipx service
Use the
undo ipx service
item.
# Add a static service information item with the service type being 4, service name
"FileServer", server network ID 130, node value 0000-0a0b-abcd, server hop 1
and server preference 60.
<Sysname> system-view
[Sysname] ipx service 4 FileServer 130.0000-0a0b-abcd 451 hop 1 preference 60
ipx split-horizon
undo ipx split-horizon
Interface view
None
Use the ipx split-horizon
interface.
Use the
undo ipx split-horizon
interface.
By default, split horizon is enabled on the interface.
# Enable split horizon on the interface Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx split-horizon
ipx tick ticks
undo ipx tick
command to delete an IPX static service information
command to enable split horizon on the current
command to disable split horizon on the current
2549