Display Ftp Client Configuration; Ftp - H3C MSR 20-20 Command Reference Manual

2378 C 158: FTP C
HAPTER
View
Parameter
Description
Example

display ftp client configuration

Syntax
View
Parameter
Description
Related command:
Example

ftp

Syntax
View
Parameter
C C
LIENT ONFIGURATION OMMANDS
FTP client view
None
Use the disconnect
remain in FTP client view.
This command is equal to the close command.
# Disconnect from the remote FTP server but remain in FTP client view.
[ftp] disconnect
221 Server closing.
display ftp client configuration
Any view
None
Use the display ftp client configuration
configuration information of the FTP client.
n
Currently this command displays the configuration information of the source
address. If the currently valid source address is the source IP address, this
command displays the configured source IP address; if it is the source interface,
this command displays the configured source interface.
ftp client source.
# Display the current configuration information of the FTP client.
<Sysname> display ftp client configuration
The source IP address is 192.168.0.123
ftp [ server-address [ service-port ] [ source { interface interface-type
interface-number | ip source-ip-address } ] ]
User view
server-address: IP address or host name of a remote FTP server.
service-port: Port number of the remote FTP server, in the range of 0 to 65535.
The default value is 21.
command to disconnect from the remote FTP server but
command to display the