Default Entity Fax - H3C MSR 20-20 Command Reference Manual

176

default entity fax

Syntax
View
Parameter
F
AX OVER
C
OMMANDS
default entity fax baudrate { 2400 | 4800 | 9600 | 14400 | disable | voice }
default entity fax ecm
default entity fax level level
default entity fax local-train threshold threshold
default entity fax nsf-on
default entity fax protocol { standard-t38 | t38 } [ hb-redundancy number |
lb-redundancy number ]
default entity fax protocol pcm { g711alaw | g711ulaw }
default entity fax train-mode { local | ppp }
undo default entity fax { baudrate | ecm | level | local-train threshold | nsf-on |
protocol | train-mode }
Voice dial program view
baudrate: Specifies the maximum transmission rate of the fax. The default value
is voice.
2400: Sets the maximum transmission rate to 2400 bps.
■
4800: Negotiates the baud rate first in accordance with the V.27 fax protocol.
■
The maximum transmission rate is 4800 bps.
9600: Negotiates the baud rate first in accordance with the V.29 fax protocol.
■
The maximum transmission rate to 9600 bps.
14400: Negotiates the baud rate first in accordance with the V.17 fax protocol.
■
The maximum transmission rate to 14400 bps.
disable: Disables the fax forwarding capability.
■
voice: Sets the fax rate to the allowed maximum voice speed for different
■
codec protocols.
ecm: Enables the fax error correction mode. It is disabled by default.
level level: Specifies the fax signal level in dBm (in the range of -60 to -3). The
default value is -15.
IP C
ONFIGURATION