Display Ipx Routing-Table Protocol - H3C MSR 20-20 Command Reference Manual

2534 C 172: IPX C
HAPTER

display ipx routing-table protocol

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Table 660 Description on the fields of the display ipx routing-table verbose command
Field
Routes
Destination Network ID
Protocol
Preference
Ticks
Hops
Nexthop
Time
Interface
State
display ipx routing-table protocol { default | direct | rip | static } [ inactive |
verbose ]
Any view
default: Displays default routing information.
direct: Displays direct routing information.
rip: Displays all IPX RIP routing information.
static: Displays all IPX static routing information.
inactive: Displays inactive routing information.
verbose: Displays detailed routing information, including active and inactive
routes.
Use the display ipx routing-table protocol
information of the specified route types. Classified active and inactive routes are
displayed if the inactive and verbose keywords are not specified.
# Display default IPX routing information.
<Sysname> display ipx routing-table protocol default
Default routing tables:
Summary count: 0
Default routing tables status:<active>:
Summary count: 0
Default routing tables status:<inactive>:
Summary count: 0
display ipx routing-table statistics
Description
Total number of routes
Destination network ID of the route
Protocol type of the route
Preference of the route
Delay time of the route in ticks (a tick is 1/18 second)
Hop value of the route
The next hop of the route
Aging time of the route: 0 for directly connected routes and
static routes, which do not age.
Address and name of the outbound interface
State of the route, which could be active or inactive
command to display IPX routing