Reset Voice Fax Statistics; Voip H323-Conf Tcs-T38 - H3C MSR 20-20 Command Reference Manual

reset voice fax statistics

Syntax
View
Parameter
Description
Example

voip h323-conf tcs-t38

Syntax
View
Parameter
Description
reset voice fax statistics
User view
None
Use the reset voice fax statistics
# Clear FoIP statistics.
<Sysname> reset voice fax statistics
voip h323-conf tcs-t38
undo voip h323-conf tcs-t38
Voice view
None
Use the
voip h323-conf tcs-t38
slow-start mode to contain the T.38 capability description in its capability set.
Use the
undo voip h323-conf tcs-t38
H.323 slow-start mode from containing the T.38 capability description in its
capability set.
By default, T.38 capability description is contained.
Because NetMeeting does not support T.38 capability description parsing, you
must disable the voice gateway in H.323 slow-start mode from containing the T.38
capability description in its capability set to interwork with NetMeeting.
n
This command has global significance. The execution of this command can
■
enable all voice entities to contain the T.38 capability description in their
capability sets.
Because NetMeeting does not support T.38 capability description parsing, you
■
must configure the voip h323-conf tcs-t38 command before interworking
with NetMeeting.
If interworking with NetMeeting is required for a voice entity, you can disable
■
fax using the fax baudrate disable command or set the fax mode to a
non-T.38 mode (pcm).
command to clear FoIP statistics.
command to enable the voice gateway in H.323
command to disable the voice gateway in
2689