Redirect Return-Deal From-Terminal; Redirect Timeout - H3C MSR 20-20 Command Reference Manual

2468 C 164: U
HAPTER SER

redirect return-deal from-terminal

Syntax
View
Parameter
Description
Example

redirect timeout

Syntax
View
Parameter
Description
I C C
NTERFACE ONFIGURATION
redirect return-deal from-terminal
undo redirect return-deal from-terminal
User interface view
None
Use the
redirect return-deal from-telnet
redirects Telnet connection process the carriage returns received from the terminal
(a PC connected to the console port for example), meaning to substitute 0x0d for
0x0d 0x0a and 0x0d 0x00.
Use the undo redirect return-deal from-terminal
device that redirects Telnet connection from processing the carriage returns.
By default, the carriage returns received from the terminal are not processed.
n
The redirect commands are supported on the AUX and TTY user interfaces
■
only.
Execute other redirect commands after using the redirect enable command
■
to enable redirection on the user interface.
# Enable the device that redirects Telnet connection to process the carriage returns
received from the terminal.
<Sysname> system-view
[Sysname] user-interface tty 1
[Sysname-ui-tty1] redirect return-deal from-terminal
redirect timeout time
undo redirect timeout
User interface view
time: Idle timeout in the range 30 to 86400 seconds.
Use the
redirect timeout
telnet connection. After that, the connection is terminated.
Use the
undo redirect timeout
always-on redirected telnet connection.
By default, the idle timeout is 360 seconds.
OMMANDS
command to set the idle timeout for the redirected
command to allow the system to maintain an
command to let the device that
command to disable the