Display Users - H3C MSR 20-20 Command Reference Manual

2456 C 164: U
HAPTER SER

display users

Syntax
View
Parameter
Description
Example
I C C
NTERFACE ONFIGURATION OMMANDS
Table 635 Description on the fields of the display user-interface summary command
Field
User interface type
0:X
character mode users. (U)
UI never used. (X)
total UIs in use
display users [ all ]
Any view
all: Displays information about users on all user interfaces.
Use the display users
Use the
display users all
interfaces supported on the device.
# Display the user information of the current user interface.
<Sysname> display users
The user application information of the user interface(s):
Idx UI
+ 178 VTY 0
179 VTY 1
Following are more details.
VTY 0 :
Location: 192.168.1.54
VTY 1 :
Location: 192.168.1.58
+ : Current operation user.
F : Current operation user work in async mode.
Table 636 Description on the fields of the display users command
Field Description
Idx Absolute number of the user interface
UI The first number and the second number are respectively the absolute index
and relative index of the user interface.
Delay Interval since the last input, in the format of hh:mm:ss.
Type User type, such as Telnet, SSH, or PAD
Description
Type of user interface (CON/TTY/AUX/VTY)
0 represents the absolute number of the user interface. X
means this user interface is not used; U means this user
interface is in use; the number of the character X and U
indicates the total number of user interfaces.
Number of mode users, that is, the number of character
U.
Number of user interfaces not used, that is, the number
of character X.
Total number of user interfaces in use.
command to view the user information using the device.
command to view the user information of all the user
Delay Type Userlevel
00:00:00 TEL 3
00:02:34 TEL 3