Display Nhrp Map - H3C MSR Series Command Reference Manual

Table 180 Command output
Field
Interface
Link protocol
Number of sessions
Peer NBMA address
Peer protocol address
SA's SPI
Behind NAT
Session type
State
State duration
Input
Output

display nhrp map

Use display nhrp map to display information about NHRP mapping entries.
Syntax
display nhrp map [ interface tunnel interface-number [ peer ipv4-address ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
Description
Name of the mGRE tunnel interface.
Encapsulation protocol used by the mGRE tunnel:
•
GRE.
•
IPsec-GRE.
Total number of mGRE sessions on the tunnel interface.
Public address of the peer.
IP address of the peer tunnel interface.
SPI of the inbound and outbound SAs. This field is
available when the mGRE tunnel is carried over IPsec.
Whether the peer NHC has traversed a NAT device.
mGRE session type:
•
C-S—The local end is an NHC, and the peer end is
the NHS.
•
C-C—The local end is an NHC, and the peer end is
an NHC.
mGRE session state:
•
Succeeded.
•
Establishing.
Duration of the current session state, in the format of
hh:mm:ss.
Statistics on received packets:
•
packets—Total number of packets.
•
data packets—Number of data packets.
•
control packets—Number of control packets.
•
multicasts—Number of multicast packets.
•
errors—Number of error packets.
Statistics on sent packets:
•
packets—Total number of packets.
•
data packets—Number of data packets.
•
control packets—Number of control packets.
•
multicasts—Number of multicast packets.
•
errors—Number of error packets.
1145