Priority Mapping Table Configuration Commands; Display Qos Map-Table - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches
Chapter 4 Priority Mapping Configuration

4.1 Priority Mapping Table Configuration Commands

4.1.1 display qos map-table

Syntax
display qos map-table [ dot1p-dp | dot1p-lp | dscp-dot1p | dscp-dp | dscp-dscp ]
View
Any view
Parameters
dot1p-lp: Specifies the 802.1p precedence-to-local precedence mapping table.
dot1p-dp: Specifies the 802.1p precedence-to-drop precedence mapping table.
dscp-dp: Specifies the DSCP-to-drop precedence mapping table.
dscp-dot1p: Specifies the DSCP-to-802.1p precedence mapping table.
dscp-dscp: Specifies the DSCP-to-DSCP mapping table.
Description
Use the display qos map-table command to display the configuration of a priority
mapping table.
If the type of the priority mapping table is not specified, the configuration of all the
priority mapping tables is displayed.
Related commands: qos map-table.
Examples
# Display the configuration of the 802.1p precedence-to-drop precedence mapping
table.
<Sysname> display qos map-table dot1p-dp
MAP-TABLE NAME: dot1p-dp
IMPORT
0
1
2
3
Commands
: EXPORT
: 2
: 2
: 2
: 1
Chapter 4 Priority Mapping Configuration
TYPE: pre-define
4-1
Commands