Renesas H8S/2100 Series Hardware Manual page 274

Section 10 16-Bit Timer Pulse Unit (TPU)
Bit Bit Name
1 TGFB
0 TGFA
Note: * The write value should always be 0 to clear the flag.
Rev. 1.00 May 09, 2008 Page 248 of 954
REJ09B0462-0100
Initial
value R/W Description
0 R/(W)* Input Capture/Output Compare Flag B
Status flag that indicates the occurrence of TGRB input
capture or compare match.
[Setting conditions]
•
•
[Clearing condition]
When 0 is written to TGFB after reading TGFB = 1
0 R/(W)* Input Capture/Output Compare Flag A
Status flag that indicates the occurrence of TGRA input
capture or compare match. The write value should
always be 0 to clear this flag.
[Setting conditions]
•
•
[Clearing condition]
When 0 is written to TGFA after reading TGFA = 1
When TCNT = TGRB while TGRB is functioning as
output compare register
When TCNT value is transferred to TGRB by input
capture signal while TGRB is functioning as input
capture register
When TCNT = TGRA while TGRA is functioning as
output compare register
When TCNT value is transferred to TGRA by input
capture signal while TGRA is functioning as input
capture register