Renesas H8S/2100 Series Hardware Manual page 643

Bit Bit Name Initial Value Slave Host Description
5 IRQ9E3 0
4 IRQ6E3 0
R/W

R/W Host IRQ9 Interrupt Enable 3
Enables or disables an HIRQ9 interrupt request
when OBF3A is set by an ODR3 write.
0: HIRQ9 interrupt request by OBF3A and IRQE9E3
is disabled.
[Clearing conditions]
•
Writing 0 to IRQ9E3
•
LPC hardware reset, LPC software reset
•
Clearing OBF3A to 0 (when IEDIR3 = 0)
1: [When IEDIR3 = 0]
HIRQ9 interrupt request by setting OBF3A to 1 is
enabled.
[When IEDIR3 = 1]
HIRQ9 interrupt is requested.
[Setting condition]
Writing 1 after reading IRQ9E3 = 0

R/W Host IRQ6 Interrupt Enable 3
Enables or disables an HIRQ6 interrupt request
when OBF3A is set by an ODR3 write.
0: HIRQ6 interrupt request by OBF3A and IRQE6E3
is disabled.
[Clearing conditions]
•
Writing 0 to IRQ6E3
•
LPC hardware reset, LPC software reset
•
Clearing OBF3A to 0 (when IEDIR3 = 0)
1: [When IEDIR3 = 0]
HIRQ6 interrupt request by setting OBF3A to 1 is
enabled.
[When IEDIR3 = 1]
HIRQ6 interrupt is requested.
[Setting condition]
Writing 1 after reading IRQ6E3 = 0
Section 20 LPC Interface (LPC)
Rev. 1.00 May 09, 2008 Page 617 of 954
REJ09B0462-0100