Renesas H8S/2100 Series Hardware Manual page 356

Section 12 8-Bit Timer (TMR)
• TCSR_X
Bit Bit Name
7 CMFB
6 CMFA
5 OVF
4 ICF
3 OS3
2 OS2
Rev. 1.00 May 09, 2008 Page 330 of 954
REJ09B0462-0100
Initial
Value R/W Description
0 R/(W)* Compare-Match Flag B
[Setting condition]
When the values of TCNT_X and TCORB_X match
[Clearing condition]
Read CMFB when CMFB = 1, then write 0 in CMFB
0 R/(W)* Compare-Match Flag A
[Setting condition]
When the values of TCNT_X and TCORA_X match
[Clearing condition]
Read CMFA when CMFA = 1, then write 0 in CMFA
0 R/(W)* Timer Overflow Flag
[Setting condition]
When TCNT_X overflows from H'FF to H'00
[Clearing condition]
Read OVF when OVF = 1, then write 0 in OVF
0 R/(W)* Input Capture Flag
[Setting condition]
When a rising edge and falling edge is detected in the
external reset signal in that order
[Clearing condition]
Read ICF when ICF = 1, then write 0 in ICF
0 R/W Output Select 3 and 2
0 R/W These bits specify how the TMOX pin output level is to
be changed by compare-match B of TCORB_X and
TCNT_X.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)