Ip As-Path Access-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Protocol Independent Features
-
IP AS PATH ACCESS
ip as-path access-list <1-199> {deny|permit} <regular-
expression>
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure AS-path Access-list.
P
ARAMETERS
Parameter
1-199
deny
permit
regular-
expression
D V
EFAULT ALUE
None.
E
XAMPLE
In the following example, the 'ip as-path access-list' command creates an as-path
access list named '1' to deny only those routes that include paths from or through
autonomous systems 100:
ALU(config)# ip as-path access-list 1 deny _100_
346
Beta
-
LIST
Number that indicates the regular expression access list
number.
Denies access for matching conditions.
Permits access for matching conditions.
Regular expression.
Alcatel-Lucent
Description
OmniAccess 700 CLI Command Reference Guide
Beta