Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual page 358

The following command is used to configure rules for TCP in a match-list.
[<1-65535>] tcp {any|host <source ip-address>|interface
<name>|list <name>|prefix <source ip-address/prefix length>}
{any|host <destination ip-address>|interface <name>|list
<name>|prefix <destination ip-address/prefix length>}
[ack|dscp {<0-63>|<dscp-mnemonics>}|established|fin|
fragment|from <1-65536>|ip-precedence {<0-7>|<precedence-
mnemonics>}|length {<1-1500> |{eq|ge|gt|le|lt|range <1-
1500>}} |rst|service {<1-65536>|<protocol>}|syn|urg|tos {<0-
15>|<tos-mnemonics>}|type {ftp|normal|rpc|sip|tftp}]
The following command is used to configure rules for UDP in a match-list.
[<1-65535>] udp {any|host <source ip-address>|interface
<name>|list <name>|prefix <source ip-address/prefix length>}
{any|host <destination ip-address>|interface <name>|list
<name>|prefix <destination ip-address/prefix length>} [dscp
{<0-63>|<dscp-mnemonics>}|fragment|from <1-65536>|ip-
precedence {<0-7>|<precedence-mnemonics>}|length {<1-
1500>|{eq|ge|gt|le|lt|range <1-1500>}}|service {<1-65536>
|<protocol>}|tos {<0-15>|<tos-mnemonics>}|type
{ftp|normal|rpc|sip|tftp}]
The following command is used to configure rules for ICMP in a match-list.
[<1-65535>] icmp {any|host <source ip-address>|interface
<name>|list <name>|prefix <source ip-address/prefix length>}
{any|host <destination ip-address>|interface <name>|list
<name>|prefix <destination ip-address/prefix length>} [dscp
{<0-63>|<dscp-mnemonics>|fragment|icmp-type <0-255> [icmp-
subtype <0-255>]|ip-precedence {<0-7>|<precedence-
mnemonics>}|length {<1-1500>|{eq|ge|gt|le|lt|range <1-
1500>}}|tos {<0-15>|<tos-mnemonics>}]
The following command is used to configure rules using the protocol
numbers.
[<1-65535>] protocol <1-65535> {any|host <source ip-address>
|interface <name> |list <name>|prefix <source ip-address/
prefix length>} {any|host <destination ip-address>|interface
<name>|list <name>|prefix <destination ip-address/prefix
length>} [dscp {<0-63>|<dscp-mnemonics>|fragment|ip-
precedence {<0-7>|<precedence-mnemonics>} |length {<1-1500>
|{eq|ge|gt|le|lt|range <1-1500>}} |tos {<0-15>|<tos-
mnemonics>}|type {ftp|normal|rpc|sip|tftp}]
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
match-lists (rulesets)
325
Beta