Cablelength Short - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
T1E1 Line Card

CABLELENGTH SHORT

cablelength short {110ft|220ft|330ft|440ft|550ft|660ft}}
D
ESCRIPTION
This command is entered in the controller configuration mode to set the
cablelength for the T1 interface.
P
ARAMETERS
110ft
220ft
330ft
440ft
550ft
660ft
D V
EFAULT ALUE
The default length of the cable for a T1 interface is 110ft.
E
XAMPLE
The following example sets the transmit attenuation of controller T1 of slot 1 and
port 1 to the appropriate levels for a cable between 111 and 220 feet long:
ALU(config)# controller t1 1/0
ALU(config-controller)# cablelength short 220
222
Beta
Parameter
Alcatel-Lucent
Description
Cable length of 0 to 110 feet.
Cable length of 111 to 220 feet.
Cable length of 221 to 330 feet.
Cable length of 331 to 440 feet.
Cable length of 441 to 550 feet.
Cable length of 551 to 660 feet.
OmniAccess 700 CLI Command Reference Guide
Beta