Table of Contents
Advertisement
SHOW IP PROTOCOLS
show ip protocols [summary]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays the parameters and current state of the active routing protocol
process.
P
ARAMETERS
Parameter
summary
E
XAMPLE
ALU# show ip protocols
Routing Protocol is
Sending updates every 30 seconds, next due in 27 seconds
Invalid after 180 seconds, hold down 180, flushed after 240 seconds
Default redistribution metric is 3
Redistributing External Routes from:
connected metric 3
static metric 4
Default version control: send version 2, receive version 2
Automatic network summarization is in effect
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Interface
GigabitEthernet7/1
loopback1
Routing for Networks:
1.0.0.0
4.0.0.0
Routing Information Sources:
Gateway
1.1.1.1
Distance: (default is 120)
ALU# show ip protocols summary
Index Process Name
0
ospf 1
1
ospf 2
2
rip
3
bgp 200
4
static
5
connected
6
connected-ppp
ALU#
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Specify this keyword to view the parameters and current
state of the active routing protocols summary.
"rip"
Send
Recv
2
2
2
2
Interface
GigabitEthernet7/1
Alcatel-Lucent
show ip protocols
Description
Key-chain
Distance
Last Update
115
00:00:00
Beta
371
Advertisement
Table of Contents
