Radius-Server Timeout; Reload - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
System Configuration and Monitoring
-
RADIUS SERVER TIMEOUT
radius-server timeout <1-1000>
D
ESCRIPTION
This command is used to specify a global timeout value that will be applied to all
the RADIUS groups (provided there is no server specific timeout value
configured).
P
ARAMETERS
timeout <1-1000>
D V
EFAULT ALUE
The default timeout value is 5 seconds.
E
XAMPLE
ALU(config)# radius-server timeout 10

RELOAD

reload [line]
D
ESCRIPTION
To reload the system, also referred to as a soft reboot.
P
ARAMETERS
line
E
XAMPLE
ALU# reload "where's slot 7"
Do you really want to reboot the Chassis (y/[n])?y
Do you want to save config before rebooting (y/[n])n
ALU#
The system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Restarting system.
84
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Number of seconds that the OA-700
should wait for a reply from the RADIUS
server before retrying.
Description
Short description as to why the system is
being reloaded.
OmniAccess 700 CLI Command Reference Guide
Beta