Bgp Write Config - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command overrides the configured router identifier.
P
ARAMETERS
Parameter
ip-address
D V
EFAULT ALUE
Calculates Router ID from interface IP addresses.
E
XAMPLE
ALU(config-router bgp AS30)# bgp router-id 1.1.1.1

BGP WRITE CONFIG

bgp write config
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command shows BGP specific configuration details.
P
ARAMETERS
None.
D V
EFAULT ALUE
Disabled.
E
XAMPLE
ALU(config-router bgp AS30)# bgp write config
router bgp 30
bgp enforce-first-as
!
address-family ipv4 unicast
aggregate-address 0.0.0.0/0
aggregate-address 35.0.0.0/8 attribute-map m1
exit-address-family
ALU(config-router bgp AS30)#
414
Beta
Router ID in the IP address format.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta