AUTO QOS VOIP
auto qos voip
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
enables Auto QoS VoIP on an interface.
P
ARAMETERS
None.
D
V
EFAULT
ALUE
None.
E
XAMPLE
ALU(config-if Serial0/1:3)# auto qos voip
BANDWIDTH
bandwidth {<101-700000000>|percent <1-100>}
D
ESCRIPTION
This command is entered in the class mode. This command is used to configure
the bandwidth for a traffic class.
Note:
You cannot mix the absolute bandwidth command with percentage bandwidth
command across policy hierarchy.
P
ARAMETERS
101-700000000
1-100
D
V
EFAULT
ALUE
None.
E
XAMPLE
ALU(config-pmap-P1-C1)# bandwidth 101
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
The absolute bandwidth (bps) value.
The bandwidth in percentage.
Beta
auto qos voip
779