Show Logging Priority - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW LOGGING PRIORITY

show logging priority <0-7>
D
ESCRIPTION
Displays the log messages of specified priority and higher (numerically lower).
P
ARAMETERS
0-7
D V
EFAULT ALUE
Default priority is 7.
E
XAMPLE
The following example shows messages of priority 3 or higher.
ALU
> show logging priority 3
2005 Oct 13 04:41:30:%MIM-1-LOG:Interface GigabitEthernet7/0,changed state to down
2005 Oct 13 04:41:30: %MIM-1-LOG: Line protocol on Interface
GigabitEthernet7/0, changed state to down
2005 Oct 13 14:13:06: %ntpdate-3-LOG: No server suitable for synchronization found
The following example shows only the messages with priority 3.
ALU
> show logging priority 3 exact
2005 Oct 13 14:13:06: %ntpdate-3-LOG: No server suitable for synchronization found
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
show logging priority
Description
Range of priority level.
Beta
103