Ror-Callserver Address - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Telephony Services
-
ROR CALLSERVER ADDRESS
ror-callserver address <ip-address> priority <1-5> [vrf <vrf-
name>]
D
ESCRIPTION
Enter this command in the Telephony Service Mode. This command is used to
configure IP address of the call server (like primary, secondary call server) to the
list of call servers maintained by ROR and its priority.
P
ARAMETERS
ip-address
1-5
vrf-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(telephony-service)# ror-callserver address 100.0.0.10
priority 1
R H
ELEASE ISTORY
Release 2.3: command was introduced.
756
Beta
Parameter
Alcatel-Lucent
Description
IP address of the call server (like primary,
secondary, and so on)
Indicates priority for the call server.
Value as 1 in "priority" parameter corresponds to
primary call server, 2 corresponds to secondary
call server, 3 to tertiary call server, and so on.
Name of the VRF.
Note: VRF parameter in this command is
not supported in this release.
OmniAccess 700 CLI Command Reference Guide
Beta