Table of Contents
Advertisement
Left running head:
Chapter name (automatic)
Switching on L2 Ports
NO SWITCHPORT MODE
no switchport mode
This command first removes the hybrid/trunk mode configured on the interface. If
the interface is configured with access VLAN configuration, it changes to access
mode since it takes precedence over the bridging mode. If no access VLAN is not
configured, then the interface moves to pure bridging mode.
NO SWITCHPORT TRUNK ALLOWED VLAN
no switchport trunk allowed vlan <2-4094>...
This command deletes the trunk VLANs configured on the interface.
SHOW CHASSIS
show chassis
D
ESCRIPTION
This command displays all the cards configured on the OA-700. Issue this
command to check if the L2 card is installed appropriately in the system.
P
ARAMETERS
None.
E
XAMPLE
ALU> show chassis
Physical inventory at Thu Aug 21 23:43:15 2008
System started approximately Thu Aug 21 23:40:16 2008
Uptime is 0 days 0 hours 4 minutes 10 seconds
L2 - 8-port copper GigE (active)
Slot number: 0
Part number: 902603-90
Manufacturer:
Description: 8-port copper GigE
Serial number:
Version: 00
Revision: W
Loader version: 2.30
ALU-OS version: 2.2.20-R02
MDC
SE - Services engine (active)
Slot number: 3
Part number: 902601-90
Manufacturer:
Description: Services engine-I
Serial number:
Version: 00
164
Beta
ALU
DD05XX000000
Serial number: WL0534000127
Revision: Q
Version: 01
ALU
ND0533001498
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta
Advertisement
Table of Contents
