Pim Configuration Commands; Clear Ip Pim Neighbor; Clear Ip Pim State-Info - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multicast Routing
PIM C
ONFIGURATION

CLEAR IP PIM NEIGHBOR

clear ip pim neighbor {*| <interface-name> {[neighbor-
address]|*}}
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command clears the neighbor information on an interface.
P
ARAMETERS
Parameter
*
interface-name
neighbor-address Clears the specified neighbor information.
E
XAMPLE
ALU# clear ip pim neighbor GigabitEthernet 3/0 1.1.1.1
CLEAR IP PIM STATE
clear ip pim state-info [<group-address>] [<source-address>]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode.This
command clears the SG State information.
P
ARAMETERS
Parameter
group-address
source-address
E
XAMPLE
ALU# clear ip pim state-info
512
Beta
C
OMMANDS
Clears all neighbor information.
Clears neighbor information on the specified interface.
-
INFO
Address of the multicast group.
Clears the PIM states of the specified source (S) for given
group (G) i.e. (S,G) states.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta