Show Frame-Relay Pvc - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Frame Relay
-
SHOW FRAME RELAY PVC
show frame-relay pvc [{<16-1022>|interface <name>}]
D
ESCRIPTION
This command displays the status of the Frame Relay Permanent Virtual Circuit
(PVC). The "Show" command can be entered in the Super User mode/
Configuration mode.
P
ARAMETERS
name
16-1007
E
XAMPLE
The following example displays the status of the PVC identified by DLCI 200
ALU(config-if Serial0/0:0)# show frame-relay pvc interface
Serial 0/0:0
PVC Statistics for interface Serial0/0:0 (Frame Relay DTE)
DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE,
INTERFACE = Serial0/0:0
input pkts
in bytes
in pkts dropped
in FECN pkts
in BECN pkts
in DE pkts
out bcast pkts
ALU(config-if Serial0/0:0)#
256
Beta
Parameter
0
0
0
0
0
0
0
Alcatel-Lucent
Description
Interface name.
DLCI value.
output pkts
out bytes
out pkts dropped
out FECN pkts
out BECN pkts
out DE pkts
out bcast bytes
OmniAccess 700 CLI Command Reference Guide
Beta
0
0
0
0
0
0
0