Show Ip Route - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW IP ROUTE

show ip route [vrf <vrf-name>] [{network-number|ip-ddress/
prefix length} [longer-prefixes]|ospf [<1-65535>]
|connected|bgp|rip|summary|supernets-only]
D
ESCRIPTION
This command displays the IP routing table for the default VRF.
P
ARAMETERS
vrf-name
{network-number|ip-
ddress/prefix length}
longer-prefixes
ospf [<1-65535>]
|connected|bgp|rip|su
mmary|supernets-only]
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show ip route vrf ALU-vrf
Codes: R - RIP, O - OSPF, C - connected
S - static, M - mcstatic, B - BGP, A - ASE
IA - OSPF inter area route, E1 - OSPF external type 1 route,
E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route,
N2 - OSPF NSSA external type 2 route
* - candidate default route
Gateway of last resort is not set
1.0.0.0 is variably subnetted, 2 subnets, 2 masks
B 1.0.0.0/8 [20/0] via 4.4.4.1, GigabitEthernet3/0
O 1.1.1.0/24 [110/110][1] via 4.4.4.1, GigabitEthernet3/0
4.0.0.0 is variably subnetted, 2 subnets, 2 masks
B 4.0.0.0/8 [20/0] via 4.4.4.1, GigabitEthernet3/0
C 4.4.4.0/24 [0/0] is directly connected, GigabitEthernet3/0
B 5.0.0.0/8 [20/0] via 4.4.4.1, GigabitEthernet3/0
ALU
(config)#
R H
ELEASE ISTORY
Release 2.3: command was introduced.
OmniAccess 700 CLI Command Reference Guide
Beta
Field
The name of the VRF for which the routing
information is to be viewed.
Displays the routing information for the given network
number or IP address and prefix length.
Specifies that only routes matching the IP address
and mask pair should be displayed.
Displays the output for a specific routing protocols.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
show ip route
563
Beta